崗位職責：
1. 積極參與TG3后的新項目，與項目質量一起完成相關任務；Actively involved in phase 4 of APDS project, working together with Project Quality
2. 及時更新控制計劃等相關質量文件確保質量策劃文件有效性（例如，PFMEA更新后更新控制計劃，檢驗操作指導書，視覺輔助等）Updates control plans and ensures that quality planning documentation is always updated (for example PFMEA, SWI, visual aids)
3. 核實AS7質量相關任務滿足ALV和客戶要求。在SOP前核實所有未關閉問題是否完成。Verifies that the results from quality related activities at R@R meet Autoliv and customer requirements in the scope of AS007. Verifies the closure of open issues prior to SOP.
4. 用8D方法引導問題解決小組分析不合格產品和客戶反饋問題，分析內部PPM和進行持續改進活動，如有必要與CQ一起跟蹤改善結果；Leads Problem esolution Cross Functional Team using 8D-process: To analyze any product non-conformities in order to solve issues and verify customer or ALV concern；To communicate and follow up (8D) with CQE and CQS according to need； To analyze internal ppm, and generate continuous improvement actions (e.g. PDCA, standards, poka-yoke, product changes, RPN reduction);
5. 協調處理和隔離所有可疑產品。 Coordinates the disposition and hold of all
suspect products (AS412)；
6. 檢查其他工廠受影響的適用于AS053的Q Alert.Checks if other ALV plants are
affected and applies AS053 (Q Alert)
7. 支持完成和維護本地和全球 Yokoten活動或LL等； Supports implementation and maintenance of local and global Yokoten actions and lessons learned
8. 積極參與零缺陷改善活動；Actively involved in Zero Defect Workshops
9. 負責PFMEA go&see and fix 工作計劃的編制、實施；Responsible for edit PFMEA go&see and fix work plan and implement task based on plan;
10. 追溯系統防火演練，編制計劃并實施，跟進問題整改完成。 Trace system fire drill，set up plan and implementation, follow up corrective actions competition.
11.負責編制年度產品審核計劃并實施；Responsible for making annual
Product Audition Plan and implementation;
12. COP抽樣計劃的編制；Responsible for COP sample plan;
13.積極參與識別產線和產品的潛在風險，協助AMC對其進行整改；Actively involved to identify the potential risk process and products， support AMC to improve;
14.監督量檢具的使用，協助維護相關量檢具Supervise the gauge status, support
maintenance gauge with related person.
任職要求：1.熟悉質量工具，8D分析方法；Master quality tool, 8Danalysis method;
2. 有兩年的汽車行業經驗；Have two years’ work experience automotive industry;
3. 有過程審核和體系審核經驗；Have work experience of process & system audit;