核心職責(Key Responsibilities):
- 支持工藝設計團隊開展油氣工藝系統前端工程設計(FEED)及詳細設計的編制與執行工作 | Support the process design team to prepare and execute the oil & gas process system FEED and Detail Design work
- 編制設備及儀表數據表,完成管線與設備尺寸核算、安全閥尺寸計算工作 | Prepare and design for equipment and instrumentation datasheets, line & equipment sizing and relief valve sizing calculations
- 依據工藝功能及危害與可操作性分析(HMB)要求,設計浮式生產裝置(FPU)及管道儀表流程圖(PID) | Design the FPU & PID as per process function and HMB requirement
- 審核客戶文件、技術規范、數據表、前端工程設計(FEED)設計驗證結果及計算資料,提出優化建議 | Review the customer's documents, specifications, data sheet, FEED design verification and calculations, and raise optimization proposals
- 協助開展工藝模擬分析與設計計算、工藝流程圖(PFD)/ 管道儀表流程圖(PID)工藝優化、工藝設備選型及尺寸核算工作,為因果圖(C&E diagram)、控制說明、停車方案提供輸入資料 | Assist to perform process simulation analysis & design calculation, PFD / PID process optimization, and process equipment selection and sizing, provide inputs for C & E diagram, control narratives, shutdown philosophies
核心任職資格(Key Qualifications):
- 化學工程或油氣工程相關專業本科及以上學歷,5 年及以上相關工藝工程工作經驗 | Bachelor degree or above in chemical or oil & gas engineering with at least 5 years related process engineering experience
- 理想情況下,直接參與過浮式生產儲卸油裝置(FPSO)/ 生產平臺的上部模塊工藝設計工作(含前端工程設計 FEED 及詳細設計階段) | Ideally directly participated the topside process design works (incl. FEED and detailed design) for FPSO / Production platform
- 能夠使用 ASPEN HYSYS / Flaresim 模擬軟件,了解 PipeNet、SPI 及 Aveva Diagram 軟件 | Able to use ASPEN HYSYS / Flaresim simulation program, knowledge of PipeNet, SPI and Aveva Diagram
- 具備一定的船級社規范及相關海上標準 / 法規經驗 | Some experience of Classification Rules and related Offshore Standards / Regulations